Showing all 7 results

Blumat Digital Water/Moisture Level Sensor Meter “20cm”

20.000 KD

Instrument for measuring soil moisture (or dryness) in pots.
Measures soil moisture as an aide for making dependable watering decisions, especially for larger planting tubs as well as individual plants in the ground, for instance, in a winter garden or greenhouse.

It is impossible to judge the amount of moisture present inside the soil ball in a pot or in general around the roots just with the eye or by feeling the surface with a finger. (The surface can be dry even when there still is enough moisture within.) Watering often takes place based on guesswork or when the plants are already wilting. This causes stress and has an adverse effect on plant growth.

The so-called Tensiometer measures or indicates the suction force with which the roots absorb water. This force (measured as subpressure in a tube and displayed in mbar) provides a measure for moisture levels: high value = dry, low value = moist. The measuring range is from 10-750 mbar, typical values range between 100 – 300 mbar. The sensor is able to measure moisture levels in all types of soil and peat as well as in not overly coarse clay granulate substrates.
Length of the sensor approx. 24 cm, maximum inserting depth approx. 18 cm.
Delivery includes: measuring probe with attached sensor (complete sensor)

Tropf Blumat Carrot Sensors for Automatic Watering – 50 pcs.

93.500 KD

50 pcs regular blumat carrots for greenhouses and larger gardens.

Tropf Blumat Watering System – Automatic Drip Irrigation (for 10m planter) with pressure reducer

101.750 KD

This XL kit is designed to water areas up to 6.5 square meters. This Pressure kit is designed to attach to your garden hose bib/spigot. Blumat systems can adjust to any plant type or desired moisture level. This specific kit is perfect for large home and rooftop gardens and greenhouses. 40 Blumat sensors will ensure that your crops are properly watered—even when you’re not home!

Tropf Blumat Watering System – Automatic Drip Irrigation (for 3m planter)

28.500 KD

Get started using Blumats with our simple, low-cost Starter Kit. If you only have a few plants or you’d like to learn how Blumats work before converting over to a larger system, this kit is just right for you. This kit is made for a gravity-fed system (does not include fittings to attach to a hose bib or pressure system, optional separate purchase). Increase your yields and decrease grow times. Our fully-automatic, self-watering systems save time, water, and nutrients — and still ensure healthier, more potent, and faster-growing crops.

Tropf-Blumat Carrot Sensors for Automatic Watering, 2-pcs pack

4.700 KD

The Tropf-Blumat (Drip-Blumat) is a sensor that supplies plants with drips of water via thin tubing. As the soil dries, its natural suction power triggers the opening of the Tropf Blumat allowing the water to flow. When the soil is sufficiently moist, the Tropf Blumat automatically stops. The system functions fully automatically. Every plant, every container or group of plants requires at least 1 Tropf-Blumat adjusted to the individual needs of the plant. Larger containers or surfaces require longer or more than one sensor. All Tropf-Blumats are connected using one supply tube, this allows for flexibility in the layout and is changeable at any time.

Tropf-Blumat Maxi Carrot Sensor – 2pcs pack

5.700 KD

The Tropf-Blumat Maxi enables the moisture levels in deeper layers, close to the roots, to be monitored and regulated. Watering occurs more seldom but therefore more intensely – the surface of the tub stays drier.
It is typically used for larger planting tubs and solitary plants in troughs on patios and roof gardens, and also for individual solitary garden shrubs.

The Tropf-Blumat Maxi acts as a regulator and dripper, just like the standard Tropf-Blumat. However, it’s application makes sense only above a container height of 30 cm (tub size 30 cm or for a planting depth of 30 cm), the insertion depth is 15-18 cm.