BluSoak - Drip Tape
BluSoak Drip tape (by 1/2 meter length)
0.600 KDThis is our new Blumat accessory, the American developed BluSoak drip tape/soaker hose. It connects to a Blumat sensor/carrot. The Blumat detects when the soil is dry/wet enough, and start/stop feeding the BluSoak with water. The BluSoak tape starts sweating distribution moisture along it’s entire length evenly.
The price is per HALF METER (1/2m).
BluSoak Drip tape End/Flush Plug
0.450 KDUse this convenient end plug to put an end to your BluSoak soaker hose/drip tape line.
Alternatively you can Use the 3mm adapters on both ends and connect two sensors (both regular or a regular and a Maxi) or you can ‘knot’ the end of your BluSoak, but this is a much easier, better looking, and more efficient method to putting an end to the drip tape.
BluSoak Drip tape to 3mm Blumat Adapter
1.200 KDThis allows you to connect a Blumat sensor to your BluSoak drip tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn’t close enough to the sensor, make sure to use a distribution dripper in between the sensor and this fitting (example picture shown in second image).
BluSoak Drip tape to 8mm Barbed Adapter
1.000 KDThis allows you to connect either a Blumat sensor to your BluSoak drip tape (via an 8mm hose) to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water; or directly connect your blusoak to a timer through an 8mm water supply line and PRESSURE REDUCER.
BluSoak Stakes, Long – By Piece.
0.250 KDBluSoak Drip Tape Hold-Down Stake, Long (by the piece) are excellent to help hold down the blusoak tubing for easy irrigation system setup and distribution.
