Blumat Elbows for (8mm) Tubing, 3-Pack
1.050 KDDamage to the water supply tubing due to bending into too small of a radius can be avoided by the insertion of elbow connectors.
Blumat End-Piece 8-3 mm, by piece
0.350 KDThe end piece closes the open end of the 8 mm tubing and is, at the same time, the connecting piece for the last Tropf-Blumat in the series.
Blumat Mini-Branch Tee Connectors (3-3-3mm), 3-Pack
1.050 KDBranching connecting piece for drip tubing, for example, allows for a shared water supply to adjacent pots, each with a separate Tropf-Blumat.
Blumat Mini-Branch Tee Connectors (3-3-3mm), by piece
0.300 KDBranching connecting piece for drip tubing, for example, allows for a shared water supply to adjacent pots, each with a separate Tropf-Blumat.
Blumat Mini-hose union 3mm (3-pack)
1.050 KDConnect the 3mm tubing used for Tropf Blumat sensors, Blumat Distributor Drippers, or Blumat Juniors.
Blumat Pressure Reducer for Blumat Watering Systems
14.000 KDBlumat systems need low pressure, much less than comes from normal house water connections. The kits include an adapter to connect to a low-pressure water tank but if your storage tank is high uphill or if you want to connect to a faucet or garden hose, you’ll need a pressure regulator. There are cheaper versions out there but this one was designed specifically for Blumat systems and adapts to the standard 8 mm tubing that Blumats use.
Blumat Shut-off Valve for 8mm Water Supply
1.400 KDShuts-off the water supply of a branch line, for example, when the irrigating season begins later or ends earlier on the branch than on the main line.
Blumat Stopper/Cap (3mm)
0.100 KDCap off any of the 3 mm Blumat barbs – the distribution drippers, Tees, or connectors (for temporarily shutting down).
Blumat Support Stakes for Supply Tube and Drippers, 10-Pack
2.200 KDHolder with insertion point for keeping the water supply tubing in place or as interval keeper in a drip chain or for keeping single dripper nozzles from lying directly on the ground (prevents excessive build-up of dirt and obstruction due to roots growing into tubing).
Blumat T-branch connector 8-3-8 mm, by piece
0.350 KDConnect the 3mm tubing used for Tropf Blumat sensors, Blumat Distributor Drippers, or Blumat Juniors.
Blumat T-branch connectors, 8-3-8 mm (3-Pack)
1.050 KDConnect the 3mm tubing used for Tropf Blumat sensors, Blumat Distributor Drippers, or Blumat Juniors.
Blumat Tank Connector for Reservoir/Rain Barrel to Blumat Systems
0.950 KDTo attach 8 mm Blumat water supply line to a rain barrel or water storage tank.
Blumat Tee 8-8-8 mm, by piece
0.350 KDBranch connection for the 8 mm water supply tubing, used to enlarge the layout.
Blumat Tee and End Piece Packs, 2-Sets
1.050 KDBranch connection for the 8 mm water supply tubing, used to enlarge the layout. The end piece closes the open end of the 8 mm tubing and is, at the same time, the connecting piece for the last Tropf-Blumat in the series.
BluSoak Drip tape (by 1/2 meter length)
0.600 KDThis is our new Blumat accessory, the American developed BluSoak drip tape/soaker hose. It connects to a Blumat sensor/carrot. The Blumat detects when the soil is dry/wet enough, and start/stop feeding the BluSoak with water. The BluSoak tape starts sweating distribution moisture along it’s entire length evenly.
The price is per HALF METER (1/2m).
BluSoak Drip tape End/Flush Plug
0.450 KDUse this convenient end plug to put an end to your BluSoak soaker hose/drip tape line.
Alternatively you can Use the 3mm adapters on both ends and connect two sensors (both regular or a regular and a Maxi) or you can ‘knot’ the end of your BluSoak, but this is a much easier, better looking, and more efficient method to putting an end to the drip tape.
BluSoak Drip tape to 3mm Blumat Adapter
1.200 KDThis allows you to connect a Blumat sensor to your BluSoak drip tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn’t close enough to the sensor, make sure to use a distribution dripper in between the sensor and this fitting (example picture shown in second image).
BluSoak Drip tape to 8mm Barbed Adapter
1.000 KDThis allows you to connect either a Blumat sensor to your BluSoak drip tape (via an 8mm hose) to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water; or directly connect your blusoak to a timer through an 8mm water supply line and PRESSURE REDUCER.
Capillary Mat System (120 x 120cm)
45.000 KDHere’s a great, automated system for growing seedlings, starts, clones, Microgreens and Baby Greens. Just hook it up to a gravity reservoir or a pressurized water line (with a pressure reducer) and make sure that those small, vulnerable plants don’t dry out or drown.
Capillary Mat System (60 x 120cm)
38.500 KDHere’s a great, automated system for growing seedlings, starts, clones, Microgreens and Baby Greens. Just hook it up to a gravity reservoir or a pressurized water line (with a pressure reducer) and make sure that those small, vulnerable plants don’t dry out or drown.
قطارة (عادية)
0.400 KDوسع قطر ومساحات الري بطريقة اقتصادية باستخدام هذه القطارات.
تحتاج الى:
3mm drip tubing (item Blumat 35509) and support stakes (Item Blumat 4305).
يمكنك اضافة:
End dripper (item Blumat 4301) or 3mm stopper (item Blumat 4306).
قطارة (الأخيرة), بالحبة
0.350 KDاستخدم هذه القطارة لانهاء خط التقطير.
تحتاج الى:
Require 3mm drip tubing (item Blumat 35509) and support stakes (Item Blumat 4305).
SILICONE Super-flex, 8mm Tubing, (3m) Roll, Red
4.250 KDThis is an 8 mm SILICONE super flexible, high quality Blumat tubing used to connect Blumat components to your water source.
